Sail Feeder and Luff Track: The luff of the sail is fed into a self-guiding feeder utilizing Spinlock guides. A bolt rope in the luff of the sail travels through a continuous and friction free PVC channel preventing wear on the luff and allowing ease of operation. Easily installs on any spar. The segmented assembly of the foil sections allow an easy and flexible fit on both traditional and pre-bent masts.
|
Sail Feeder with PVC Sailtrack and Spinlock guides - click on the images below to enlarge |
 |
 |
 |
|
The sail feeder is shown with the bottom mast foil and tapering wedges. The foils are firmly attached to the back of the mast and run the full length of the hoist. The luff of the sail is 2 1/2 inches from the back of the mast. |
Two Spinlock guides and a continuous PVC bolt rope track allow the sail to slide smoothly along the length of the hoist without wear or friction. |
The feeder and foils can be mounted into an existing sail track or tapped directly into the mast (including carbon fiber). |
|
|
||
| The mast foils are cut in short lengths to accommodate mast bend. |
| SHAPE | FEEDER | FURLING | DRIVE BOX | CLAW | HOISTING | COVER | UNDER SAIL | DECK LAYOUT | FEATURES |
